Kwon Group, Physics, Kyung Hee University

User Tools

Site Tools

You are here: » lab » research
Trace: • research

Sidebar

Lab Introduction

Members' Pages

Principal Investigator

Research Professor

Ph.D. Students

M.S. Students

Undergraduate Students

  • Kang Il Cho
  • Dong-Oan Seo

Supporting Staff

Former Members

lab:research

Table of Contents

Research Highlights in Computational NanoPhysics Lab

This page is under construction

Research Highlights

We are investigating various properties of diverse materials including semconductors, metals, and nanostructured materials, and their potential applications, using theoretical and computational methods.

Following are brief summaries of research projects conducted by Computational NanoPhysics Lab.

Phase Change Materials

PCRAM A phase change material is a material exhibiting easy and fast transition between crystalline and amorphous phases. Due to this characteristic, phase change materials have been used for rewritable DVDs and Blueray disks, and are expected to be used for phase change random access memory. Ge-Sb-Te compounds are major phase change materials. We are performing molecular dynamics simulations to identify amorphous phases of various Ge-Sb-Te compounds. Our simulation data are analyzed to explore local atomic structures of amorphous phases, which are compared with those of their crystalline counterparts.

GeTe

We investigate structural properties of varius amorphous phases and crystalline using molecular dynamics simulation. Also, based on a Radial Distribution Functions(RDFs), Angle Distribution Functions(ADFs) and Order Parameters(OPs) analyses, we study local structure characteristics of several phases. Our calculated OPs and RDFs are analyzed and compared to EXAFS data available. Finally, we estimate energy barriers not only between crystalline and one of amorphous phases, but also between different amorphous phases to explore their structural stability, using nudged elastic band method.

GeSbTe225

The phase transition of Ge2Sb2Te5 between its crystalline and amorphous phases was investigated by constructing its various amorphous phases.

Sb$_2$Te$_3$

Sb$_2$Te$_3$ is a very interesting material for rewritable optical media. We study of the switching mechanism between the amorphous and crystal states theoretically.

Phosphorene & Phosphorene Oxides

Phosphorene is a single layer of black phosphorous, recently synthesized. Its two-dimentional structure is similar to the carbon-based graphene, however, it is semiconductor compared to graphene with zero gap. So this material has attracted much attention due to its potential usage for electronic or optoelectronic devices. Because of a lone pair of electrons on each phosphorous atom, however, pristine phosphorene may be extremely reactive with air, especially with oxygen, and thus the oxidation of phosphorene would be unavoidable during synthesis and/or fabrication processes unless they were done in a vacuum environment.

Structural properties of phosphorene oxides

Due to the existence of a lone pair of electrons on each P atom, phosphorene can be easily oxidized. At first, we have investigated the structural stability of POx with 0<x<1. For every given 0<x<1 of POx, diverse configurations are considered and optimized to find its equilibrium structure to know whether such a phosphorene oxide can be formed or not.

Strain effects on electronic properties of phosphorene oxides

As x increases in POx, the electronic properties of phosphorene oxides changes. We found an intriguing phenomenon that at around 16% uniaxial tensile strain, PO (with x=1) becomes a metal with a modified Dirac cone at the gamma point in its Brillouin zone.

Transition Metal Dichalcogenides (MX$_2$)

Transition metal dichalcogneides (MX$_2$) are another 2D layered materials similar to graphene. We investigate the physical properties of various MX$_2$, where M is a transition metal atom in group 4 (Ti, Zr, Hf), 5 (V, Nb, Ta), or 6 (Cr, Mo, W) elements; and X is a chalcogen atom, either S or Se.

Single-layer MX$_2$

We investigate the structural, electronic properties of MX$_2$. (M=Ti, V, Cr, Zr, Nb, Mo, Hf, Ta, W) (X=S, Se) and their phase transition. We calculate the relative stability of two phase structures (octahedral-T and trigonal-H) determined by considering relative positions of X. We find interesting phase existence for the each group in the periodic table. The stable phase structure of IV-group (Ti, Zr, Hf) is octahedral, while VI-group (Cr, Mo, W) is trigonal, and V-group (V, Nb, Ta) is possible two phase structures. Two phase structures of MX$_2$ have a same total energy at the same lattice constant near the each most stable lattice constant. From these results, we also study activation energy barriers at the various lattice constants such as from stable T phase to H phase, same total energy, and from stable H to T. Interestingly we find that the activation energy barrier is small at the small and large lattice constants for the stable lattice constants. It means that the phase transition occurs by compressive and tensile strains.

Stacking Configurations of MX$_2$

We investigate the effect of the interlayer interaction on the structural and electronic properties of layered MX2(M=Ti, Zr, Hf, Cr, Mo, W) structures with van der Waals interaction. We calculate the relative stability of various layer-layer stacking configurations determined by considering relative positions and orientations between neighboring layers. It is found that an intriguing coupling effect between stacking and electronic structure. Some stacking configuration with a lager inter-layer distance exhibit larger electronic band gap than the other structures.

← Li adsorption on transition metal dichalcogendies

Graphyne

Graphyne is a cousion of graphene with sp-hybridized acetylenic linkage connecting sp2 bonding in graphene.

Thermal expansion of graphyne

We have investigated the thermal expansion behaviors of three different types (α, β, and γ) of graphyne which is a two-dimensional carbon allotrope composed of sp and sp2 bonds. We have found that all three types of graphyne exhibit negative in-plane thermal expansion. The observed in-plane thermal contraction can be attributed to the ripple effect, similarly in graphene. However, the ripple effect itself is not sufficient to explain anomalously larger thermal contraction found in graphyne than in graphene. Our deliberate analysis on the phonon modes observed in graphyne enables us to discover another source causing such amplified contraction behavior. We found that there are particular phonon modes with frequencies around a few hundreds of cm-1 existing exclusively in graphyne that may fill empty spaces resulting in area reduction. These modes are attributed to the libration of “rigid units” composed of triple bonds

Strain-induced metal-insulator transition in graphyne

We have found a strain-induced metal-insulator transition in graphyne blah blah

III-V Materials

A Compound semiconductor is a semiconductor compound composed of elements from two or more different groups of the periodic table. blah blah

Thru-hole epitaxy

thru-hole

Thru-hole epitaxy has recently been reported to be able to grow readily detachable domains crystallographically aligned with the underlying substrate over 2D mask material transferred onto a substrate. [Jang \textit{et al.}, \textit{Adv. Mater. Interfaces}, \textbf{2023} \textit{10}, 4 2201406] While the experimental demonstration of thru-hole epitaxy of GaN over multiple stacks of h-BN was evident, the detailed mechanism of how small holes in each stack of h-BN survived as thru-holes during multiple stacking of h-BN was not intuitively clear. Here, we use Monte Carlo simulations to investigate the conditions under which holes in each stack of 2D mask layers can survive as thru-holes during multiple stacking. If holes are highly anisotropic in shape by connecting smaller holes in a particular direction, thru-holes can be maintained with a high survival rate per stack, establishing more epitaxial connectedness. Our work verifies and supports that thru-hole epitaxy is attributed to the epitaxial connectedness established by thru-holes surviving even through multiple stacks.

Controllable growth and facile transferability of a crystalline film with desired characteristics, acquired by tuning composition and crystallographic orientation, become highly demanded for advanced flexible devices. Here the desired crystallographic orientations and facile transferability of a crystalline film can be achieved by “thru-hole epitaxy” in a straightforward and undemanding manner with no limitation on the layer number and polarity of a 2D space layer and the surface characteristics. The crystallographic alignment can be established by the connectedness of the grown material to the substrate through a small net cross-sectional area of thru-holes, which also allows the straightforward detachment of the grown material. Thru-hole epitaxy can be adopted for the realization of advanced flexible devices on large scale with desired crystallographic orientation and facile transferability.

Optical properties of GaAsSb

It is very important to understand the electronic structure of GaAs and GaSb for fabrication of electronic and optoelectronic devices. Recently, tenary compounds, GaAs1-xSbx began to attract much attention from researchers because they were synthesized and expected to be new materials for optoeletronic devices. For x = 1 and x = 0, there have been a lot of computational studies to investigate their structural, electronic and optical properties, but few studies for general cases. Moreover, it has been known that “regular” density functional calculations does not describe the correct electronic structures including underestimated band gap and incorrect band splitting. To resolve such issues, we consider spin-orbit coupling effects and GW corrections on GaAs1-xSbx with the composition of x = 0, 0.25, 0.5, 0.75, and 1. To calculate their band structures, we make use of maximally localized Wannier functions to interpolate GW quasiparticle band structures. Based on our GW calculations, we discuss the trend of band gaps at various high symmetric points in the Brillouin zone with the composition x.

Latent Order in High-Angle Grain Boundary of GaN

We report the existence of latent order during core relaxation in the high-angle grain boundaries (GBs) of GaN films using atomic-resolution scanning transmission electron microscopy and ab initio density functional theory calculations. Core structures in the high-angle GBs are characterized by two pairs of Ga-N bonds located next to each other. The core type correlates strongly with the bond angle differences. We identify an order of core relaxation hidden in the high-angle GBs by further classifying the 5/7 atom cores into a stable 5/7 core (5/7(S)) and a metastable 5/7 core (5/7(M)). This core-type classification indicates that metastable cores can exist at real high-angle GBs under certain circumstances. Interestingly, 5/7(M) exhibits distinct defect states compared to 5/7(S), despite their similar atomic configurations. We investigate the reconstruction of defect states observed in 5/7(M) by analyzing the real-space wave functions. An inversion occurred between two localized states during the transition from 5/7(S) to 5/7(M). We suggest an inversion mechanism to explain the formation of new defect states in 5/7(M).

Morphology transformation of faceted GaN microcrystals

Morphology transformation of faceted GaN
We have studied the growth and characterization of patterned and uniformly distributed GaN microcrystals with well-defined facets and epitaxy. The microcrystals were grown on a mask pattertned by lithography, and formed by selective-area epitaxy using metal-organic chemical vapour deposition. The GaN microcrystals have similar sizes and shapes. Each microcrystal consists of an upper and lower part, which are rotated by 30 deg. Transmission electron microscopy shows that there is a rather clear interface between the two parts of the crystal, suggesting a sudden change in the growth direction. We performed ab initio calculations for the surface energies of hexagonal GaN, and the growth morphology is explained based on surface energy consideration.

Iron-based Materials

Iron is one of the most important and widely-used materials in our lives. We have studied iron nanoclusters and iron-based alloys using ab initio and parametrized calculations.

Enhanced mechanical properties of Fe-Al alloys with Mn impurity

Fe-Al alloys
We have examined the structural and mechanical properties of Fe-Al alloys at various Al concentrations with or without a small amount of Mn. For each disordered Fe-Al alloy, we considered sundry disordered configurations to determine the equilibrium structure. It was found that the disordered Fe-Al alloy with high Al content (~25 at%) becomes less stable and more brittle than its ordered counterpart DO3 second phase. To predict the ductility of Fe-Al alloys, we estimated Pugh's constant defined by the ratio between bulk and shear moduli and apply the Pugh's criterion. We found that an addition of a small amount of Mn may stabilize disordered solid solutions over the DO3 second phase. Moreover, the Mn addition also improves its mechanical properties making the disordered Fe-Al alloy more ductile than DO3.

Magic Numbers of Iron Nano Clusters

Using tight-binding method implemented with Stoner model of itinerant magnetism, we have searched the magic numbers of iron nano clusters with up to N=30 iron atoms.

Schwarzites: Carbon Allotrope with Negative Gaussian Curvature

Schwarzite is a carbon allotrope with negative Gaussian curvature.

Structural and electronic properties of schwarzite

str-elec-schwarzite
We have studied the stability, elastic properties and electronic structure of sp2 carbon minimal surfaces with negative Gaussian curvature, called schwarzites. We focused on two systems with cubic unit cells containing 152 and 200 carbon atoms, which are metallic and very rigid. The porous schwarzite structure allows for efficient and reversible doping by electrondonors and acceptors, amking it a promising candidate for the next generation of alkali ion batteries. We identified schwarzite structures that act as arrays of interconnected spin quantum dots or become magnetic when doped. We introduced two interpenetrating scwarzite structures that may find their use as the ultimate super-capacitor.

  • Designing rigid carbon foams
    Sora Park, Kritsada Kittimanapun, Jeung Sun Ahn, Young-Kyun Kwon, and David Tomanek, J. Phys.: Condens. Matt. 22 (33), 334220 (2010).
    link: download:

Thermoelectric properties of schwarzite

Using ab initio density functional theory and Boltzman transport theory, we have investigated the thermoelectric properties of schwarzite and estimate its ZT values. blah blah.

← Li adsorption on schwarzites

Metal-Organic Interfaces

We have investigate various phenomena and changes in properties occurring at interfaces between metal and organic molecules using ab initio density functional theory

HATCNT on graphene

Using ab initio density functional theory, we have investigated the structural and electronic properties of self-assembled HATCN patterns on graphene.

HATCN on Au(111) surface

Using ab initio density functional theory, we have investigated the self-assembled pattern of HATCN molecules on gold surface.

DBTP on Ag(111) surface

Using ab initio density functional theory, we have investigated the electronic structures of self-assembled chains comprising Ag atoms and organic molecules.

Gold Nanostructures

We have investigated various properties of divers gold nanostructures using ab initio density functional theory with spin-orbit coupling.

Adsorption properties of golden fullerene

golden fullerene
We have investigated the adsorption properties of chalcogen elements (oxygen and sulfur) and nitrogen on an anionic golden fullerene Au16- and its effects on the structural and electronic properties of the golden cage. In particular, we found that when a sulfur atom is encapsulated inside Au16-, its bonding character with Au atoms appears ionic due to electron transfer from sulfur to the gold nanocage. In contrast, the exohedrally adsorbed S atom tends to have strong orbital hybridization with the gold nanocage. For an oxygen adsorption case, electrons from the golden cage tend to be shared with the adsorbed O atom exhibiting strong orbital hybridization, regardless of its adsorption sites. To investigate the transition behaviors between the most stable exohedral and endohedral adsorption configurations, we calculate the activation and reaction energies in the transition. The oxygen atom experiences a lower energy barrier than the sulfur atom due to its smaller atomic radius. Finally, we explore the vibrational properties of S- or O-adsorbed Au16- 16 buckyballs by calculating their infrared spectra. When the N atom is adsorbed on the cage, electrons are transferred to nitrogen from Au 16. The nitrogen atom may move thermally from the exterior to the interior through a bridge site. In infrared spectra, exohedral doping causes greater intensities at higher frequencies than endohedral doping.

Dimerization of metal-encapsulated gold nanoclusters

Dimerization of metal-encapsulated gold nanoclusters
We have studied the dimerization of metal-encapsulated gold nanoclusters M@Au12 (M = W, Mo) with Ih or Oh symmetry, and their structural and electronic properties.To determine the most stable dimer structure in each case, various configurations are considered. We find that during dimerization, gold atoms near the interface tend to form inter-cluster triangular bonds, which stabilize two monomer clusters by about 3.3–3.5 eV. The dimerization along a specific axis selected as the z axis causes the symmetry reduction of each M@Au12 cluster resulting in the modification of electronic structures. It is found that all the stable dimers exhibit a much smaller HOMO–LUMO gap than those of their comprising monomers. Such a gap decrease is mainly attributed to the dz2 orbital splitting of the central atoms owing to dimerization. We also calculate the vibrational modes and the corresponding IRactive spectra, which are distinguishable for different dimer configurations. In addition, we find that the IR-active modes of the Oh-based dimer structures appear to be red-shifted in comparison to those of Ih-based ones. Thus, the IR spectra may be utilized experimentally to discriminate dimer configurations with different central metal atoms and/or dissimilar structural symmetries.

1D chain formation of metal-encapsulated gold nanoclusters

We have studied the 1D chain formation of metal-encapsulated gold nanoclusters M@Au12 (M = W, Mo) with Ih or Oh symmetry, and their structural and electronic properties.

Nanowires

We have investigated various nanowires.

MoSI nanowires

MoSI nanowires Mo6S9-xIx nanowires exhibit interesting structural and electronic properties due to the flexible S linkages, which can be either short or long linke in an accordion. We have investigated the structrual and electronic properties of isolated and bundled Mo6S9-xIx nanowires. We find the optimum interwire distance depends on composition and to a smaller degree on the orientation of the wires. Structural order is expected in bundles with x=0 and x=6, since there is no disorder in the decoration of the Mo clusters. In bundles with other stoichiometries we expect structural disorder to occur. We find that the electronic structure of some nanowires can be switched from metallic to semiconducting by changing the interwire separation. The most intriguing changes occur in nanowires with x=4.5 and 6,which change from metal to semiconductor or undergo a magnetic transition upon axially stretching or compressing the nanowires or upon changing the inter-wire separation.

← 1D chain of metal encapsulated gold nanoclusters

Nanodevices

It is expected that the Moore's law would be broken in Si-based technology in the near future. To overcome this issue, we have performed research and development of various nanodevices based on nanostructured materials.

CNT-Si junctions-based optoelectronic devices

CNT-Si
Recent progress in silicon photonics has dramatically advanced the possible realization of heterogeneous logic circuits. A variety of Boolean optoelectronic circuits have been proposed5. In this context, experimental investigation of logic operations with both optical and electrical inputs in chip-integrable devices is highly desirable. Here, we present a new kind of photodiode-based logic device using scalable heterojunctions of carbon nanotubes and silicon, the output currents of which can be manipulated completely by both optical and electrical inputs. This provides a novel platform for heterogeneous optoelectronic logic elements with voltage-switchable photocurrent responsivity of > 1 AW-1, photovoltage responsivity of >1×105 VW-1, electrical on/off ratios of >1×105 and optical on/off ratios of >1×104. To demonstrate their scalability, we fabricated a large array of photoactive elements on a centimetre-scalewafer. We also present bidirectional phototransistors and novel clock-triggerable logic elements such as a mixed optoelectronic AND gate, a 2-bit optoelectronic ADDER/OR gate and a 4-bit optoelectronic digital-to-analog converter.

"Type-switchable" FETs based on CNTs and nanoparticles

We have reported the large-scale assembly of type-switchable field effect transistors (FETs) based on carbon nanotubes (CNTs) and nanoparticles (NPs). In this device, the charges stored in NPs adjacent to ambipolar CNT channels were adjusted to control the carrier type and density in the channels. We demonstrated the real-time reconfiguration of individual FET types and logic circuit functionality. Theoretical simulation of a model system was provided to explain this doping effect. This work takes advantage of the ambipolar properties of CNTs and opens up the possibility to build new types of devices with reconfigurable functionalities.

"Textured" network devices

labonchip
Based on the percolation theory, we have performed device simulations on network devices. We have found that it is possible to make semiconducting devices out of mixture of metallic and semiconducting nanotubes.

Linker-free directed assembly of high-performance integrated devices

dvanced electronic devices based on carbon nanotubes (NTs) and various types of nanowires (NWs) could have a role in next generation semiconductor architectures. However, the lack of a general fabrication method has held back the development of these devices for practical applications. Here we report an assembly strategy for devices based on NTs and NWs. Inert surface molecular patterns were used to direct the adsorption and alignment of NTs and NWs on bare surfaces to form device structures without the use of linker molecules. Substrate bias further enhanced the amount of NT and NW adsorption. Significantly, as all the processing steps can be performed with conventional microfabrication facilities, our method is readily accessible to the present semiconductor industry. We use this method to demonstrate large-scale assembly of NT- and NW-based integrated devices and their applications. We also provide extensive analysis regarding the reliability of the method.

"Bucky-shuttle" memory device

We investigate the internal dynamics of a related model system, consisting of a K@C+60 endohedral complex enclosed in a C480 nanocapsule. We show this to be a tunable two-level system, where transitions between the two states can be induced by applying an electric field between the C480 end caps, and discuss its potential application as a nonvolatile memory element.

  • [Proceedings] The potential of carbon-based memory systems
    Mark Brehob, Richard Enbody, Young-Kyun Kwon, and David Tomanek, in R. Rajsuman, and T. Wik (eds.), Memory Technology, Design and Testing, 1999. Records of the 1999 IEEE International Workshop on, pp. 110-114, IEEE Computer Society, San Jose, CA (1999).
    link: download:

Chemical and Gas Adsorption on Nanostructures

Nanostructured materials, which ususally posses high surface/volume ratios, can be hosts of variouis adsorbates.

Aspirin on graphitic carbon structures

Using density functional theory, we investigate the adsorption properties of acetylsalicylic acid (aspirin) on the outer surfaces of a (10,0) carbon nanotube (CNT) and a (8,0) triazine-based graphitic carbon nitride nanotube (CNNT). The adsorption energies for the CNNT and CNT are 0.67 and 0.51 eV, respectively, and hence, the aspirin molecule binds more strongly to the CNNT. The stronger adsorption energy for the binding to the CNNT is ascribed to the high reactivity of its nitrogen atoms with high electron affinity. The CNNT exhibits local electric dipole moments that cause strong charge redistribution in the adsorbed aspirin molecule. The influence of an external electric field on the adsorption of aspirin on the nanotubes is explored by examining modifications in their electronic band structures, partial densities of states, and charge distributions. An electric field applied along a particular direction is found to induce molecular states of aspirin that lie within the in-gap region of the CNNT. This implies that the CNNT can be potentially utilized for the detection of aspirin.

Amino acids on graphitic carbon structures

Adsorption properties of Amino acids on graphitic carbon structures.

H2S detection in CNT-based devices

Here we report the highly effective detection of hydrogen sulfide (H2S) gas by redox reactions based on single-walled carbon nanotubes (SWCNTs) functionalized with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) as a catalyst and we also discuss the important role of water vapor in the electrical conductivity of SWCNTs during the sensing of H2S molecules. To explore the H2S sensing mechanism, we investigate the adsorption properties of H2S on carbon nanotubes (CNTs) and the effects of the TEMPO functionalization using first-principles density functional theory (DFT) and we summarize currentchanges of devices resulting from the redox reactions in the presence of H2S. The semiconducting-SWCNT (s-SWCNT) device functionalized with TEMPO shows a very high sensitivity of 420% at 60% humidity, which is 17 times higher than a bare s-SWCNT device under dry conditions. Our results offer promising prospects for personal safety and real-time monitoring of H2S gases with the highest sensitivity and low power consumption and potentially at a low cost.

Nicotine and caffeine on CNTs

Using first-principles calculations, we investigate the electronic structures and binding properties of nicotine and caffeine adsorbed on single-walled carbon nanotubes to determine whether CNTs are appropriate for filtering or sensing nicotine and caffeine molecules. We find that caffeine adsorbs more strongly than nicotine. The different binding characteristics are discussed by analyzing the modification of the electronic structure of the molecule-adsorbed CNTs. We also calculate the quantum conductance of the CNTs in the presence of nicotine or caffeine adsorbates and demonstrate that the influence of caffeine is stronger than nicotine on the conductance of the host CNT.

Metal adsorbates on graphene

Metal atoms on graphene, when ionized, can act as a point-charge impurity to probe a charge response of graphene with the Dirac cone band structure. To understand the microscopic physics of the metal-atom-induced charge and spin polarization in graphene, we present scanning tunneling spectroscopy Metal adsorbates on graphene STS simulations based on density-functional theory calculations. We find that a Cs atom on graphene is fully ionized with a significant band-bending feature in the STS whereas the charge and magnetic states of Ba and La atoms on graphene appear to be complicated due to orbital hybridization and Coulomb interaction. By applying external electric field, we observe changes in charge donations and spin magnetic moments of the metal adsorbates on graphene.

Glycines on CNTs for alcohol sensing

Glycines are spontaneously adsorbed to form into self-assembled nanoclutsers on single-walled carbon nanotubes (SWNTs). After formation of glycine nanoclusters on SWNTs, the field effect transistor (FET) devices show selective sensing ability to alcohols, such as isopropyl alcohol (IPA), methanol, and ethanol. Upon the adsorption of alcohol, the glycine-coated SWNT-FET devices exhibit pseudo-metallic transport behaviors, whereas the original and glycine-coated devices display conventional p-type transport characteristics. Computational studies support that the gate field screening effect induced by instantly formed glycine-alcohol pair layers seems to be responsible for the pseudo-metallic transport behavior.

Li Ion Batteries

A Li ion battery is one of rechargeable battery types, where Li ions move from the negative to the positive electrondes. blah blah

Li adsorption on transition metal dichalcogenides

Using ab initio density functional theory, we have investigated the adsorption properties of Li on WS2.

Li adsorption on schwarzite

Using ab initio density functional theory, we have investigated the adsorption properties of Li on schwarzites.

Hydrogen Storages

hydrogen storage is one of three main technologies to achieve so-called hydrogen economy in future. blah blah

H2 adsorption on metal-organic systems

Using ab initio density functional theory, we have investigated the adsorption properties of H2 on various organic systems

H2 adsorption on boron nitrides

H2 adsorption on boron nitrides
Using ab initio density functional theory, we have investigated the adsorption properties of H2 on hexagonal boron nitrides.

H2 adsorption on materials with "pocket" structures

Using ab initio density functional theory, we have investigated the adsorption properties of H2 on materials with “pocket” structures.

H2 adsorption on carbon-based materials

Using ab initio density functional theory, we have investigated the adsorption properties of H2 on various carbon-based materials.

Carbon Nanotubes

Using ab initio density functional theory and semi-empirical theories, we have studied various properties and applications of carbon nanotubes (CNTs), which are seamless cylinders wrapped from graphene.

Equilibrium and electronic structures of singlewall CNTs

CNT There are variety of different computational results on the same CNTs with the same computational method. To resolve this issue, we swapped completely the configurational spaces of each CNT considering its structural symmetry determined by either as well as achiral (armchair and zigzag) and chiral CNTs. As a result, We were able to identify the most stable structure and the coupling effects between structural and electronic properties.

Orientational melting in CNT ropes

Using Monte Carlo simulations, we have investigated the possibility of an orientational melting transition within a “rope” of CNTs. hen twisting nanotubes bundle up during the synthesis, orientational dislocations or twistons arise from the competition between the anisotropic interbute interactions, which tend to align neighboring tubes, and the torsion rigidity that tends to keep individual tubes straight. We mapped the energetics of a rope containing twistons onto a alttice gas model and found that the onset of a free “diffusion” of twistons, conrresponding to orientational melting, occurs at TOM ≥ 160 K.

Effect of intertube interaction in CNTs

We explored the effect of intertube interaction in bundles of single-wall CNTs and multiwall CNTs. Because of small intertube interaction and lattice frustration, we predicted very soft libration modes to occur and to disappear above the orientational melting temperature which marks the onset of free tube rotations about their axis. We also predicted such weak intertube coupling causes an additional electronic band dispersion of < 0.2 eV and opens up a pseudogap of the same magnitude at the Fermi level in the rope of (10,10) SWCNTs. In a (5,5)@(10,10) double wall CNT, the weak interwall interaction and the symmetry reduction causes four pseudogaps to open and close periodically near the Fermi level during the soft librational motaion. This electron-libration coupling, absent in solids composed of fullerenes and SWCNTs, may yield superconductivity in MWCNTs.

Microscopic growth mechansim of multi-wall CNTs

We investigated the morphology and structural stability at the growing edge of multi-wall CNTs using ab initio and parametrized calculations. We found that the open-ended structures are stabilized against dome closure by strong covalent bonds connecting the exposed edgs of adjacent walls. Growth at the open edge involves rearrangement of these bonds, which are mediated by carbon atoms bridging the gap and change the tip morphology significantly. Presence of a strong ``lip-lip'' interaction can explain formation of carbon nanotubes under annealing conditions.

← H2 stroage on CNTs
← Glycine adsorption on CNTs for alcohol sensing
← "Bucky-shuttle" memory device

Other Carbon Materials

Following are other carbon materials we have investigated for their properties and applications.

T-carbon

T-carbon T-carbon proposed first in 2011 can be made from diamond, in which every carbon atom is replaced with a carbon tetrahedron. We found that T-carbon exhibits an unusual behavior, negative thermal expansion, for which rigid unit modes excited in T-carbon are responsible.

Micro-fastening system: nanovelcro

We have explored the suitability of nanotube-based hooks for bonding. Our results indicate that a large force of 3.0 nN is required to disengage two hooks, which are formed by the insertion of pentagon-heptaon pairs in a (7,0) CNT. Nanohooks based on various nanotubes are resilient and keep their structrual integrity during the opeing process. Arrays of hooks, which are permanetly anchored in solid surfaces, are a nanoscale counterpart of velcro fasteners, forming tough bonds with a capability of self-repair.

This micro-fastening system was rigisterd as a US patent (US7,181,811).

Microscopic formation mechanism of nanotube peapods

Using molecular dynamics calculations, we have investigated the absorption of a C60 molecule in a (10, 10) nanotube either through the open and or a large defect in the tube wall as possible scenarios for the hierarchical self-assembly of (C60)n@(10,10 “nano-peapods”. We found the absorption through a defect to be significantly more efficient than the end-on absorption. This process occurs most likely within a narrow launch velocity range for the fullerene that agrees well with the observed optimum temperature window for peapod formation.

Carbon nanohorns

We have determined the stability, optimun geometry, and electronic properties of nanometer-sized capped graphitic cones, called “nanohorns”. Different nanohorn morphologies were considered, which differe in the relative location of the five terminating pentagons. Simulated scanning tunneling microscopy images of the various structures at different bias voltages reflect a net electron transfer towards the epntagon vertex sites. We found that the density of states at the tip, ovservable by scanning tunneling spectroscopy, can be used to discriminate between different tip structures.

Other Research

We are also performing our research on various interesting problems.

van der Waals epitaxy of ZnO on hBN

ZnO on hBN
Integration of semiconductor on 2D atomic layers has offered flexible optoelectronic devices. Among various 2D atomic layers BN has great potentials for diverse device applications due to its excellent thermal conductivity and chemical stability as a wide-bandgap electric insulator. We found ZnO and BN were interacted through van der waals interaction using aberration-corrected high resolution transmission electron microscopy (HR-TEM) and ab initio calculations based on density function theory (DFT). We used DFT-D2 method of Grimme to describe London dispersion interactions.

LCO

LCO
The nature of magnetic ordering in LaCoO3 epitaxial thin films has been the subject of considerable debate. We present direct observations of the spin-state modulation of Co ions in LaCoO3 epitaxial thin films on an atomic scale using aberration-corrected scanning transmission electron microscopy (STEM), electron energy loss spectroscopy (EELS), and ab initio calculations based on density functional theory (DFT) calculations. The results of an atomic-resolution STEM/EELS study indicate that the superstructure is not associated with oxygen vacancies; rather, it is associated with a higher spin state of Co3+ ions and their ordering. DFT calculations successfully reproduced the modulation of lattice spacing with the introduction of spin ordering. This result identifies the origins of intrinsic phenomena in strained LaCoO3 and provides fundamental clues for understanding ferromagnetism in Co-base oxides.

Liquid metal nanodroplet dynamics inside nanocontainer

nanocontainer
Here we report direct observations of spatial movements of nanodroplets of Pb metal trapped inside sealed carbon nanocontainers. We find drastic changes in the mobility of the liquid droplets as the particle size increases from a few to a few ten nanometers. In open containers the droplet becomes immobile and readily evaporates to the vacuum environment. The particle mobility strongly depends on confinement, particle size, and wetting on the enclosed surface. The collisions between droplets increase mobility but the tendency is reversed if collisions lead to droplet coalescence. The dynamics of confined nanodroplets could provide new insights into the activity of nanostructures in spatially constrained geometries.

Econophysics

The assessment of information transfer in the global economic network helps to understand the current environment and the outlook of an economy. Most approaches on global networks extract information transfer based mainly on a single variable. This paper establishes an entirely new bioinformatics-inspired approach to integrating information transfer derived from multiple variables and develops an international economic network accordingly. In the proposed methodology, we first construct the transfer entropies (TEs) between various intra- and inter-country pairs of economic time series variables, test their significances, and then use a weighted sum approach to aggregate information captured in each TE. Through a simulation study, the new method is shown to deliver better information integration compared to existing integration methods in that it can be applied even when intra-country variables are correlated. Empirical investigation with the real world data reveals that Western countries are more influential in the global economic network and that Japan has become less influential following the Asian currency crisis.

lab/research.txt · Last modified: 2014/12/22 11:08 by ykkwon

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
GNU Free Documentation License 1.3 Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki